Friction Lock Kit

2265 - Friction Lock Kit

$ 4200$ 42.00

Default Title

Default Title - $ 42.00 USDQuantity

Add to Cart

The friction lock is the part that holds the drive train in place and allows it to pivot up and down. You can set tension by adjusting the knob below the Friction lock on the "Hub". (Illustrated by the blue arrow).

Replacing the Friction lock requires the removal of the [Drive Train](/content/products/drive-train-base-unit "Hydrobike's Drive Train for water bike"/index.html), replacing the Friction Lock, and then install the Drive Train back.

Hydrobikes with Knob (2014 and later models)

Simply take the Knob and bolt right off (bottom rear of metal frame as above) which will ‘spread’ the round rear hub and make it easier to remove the existing drive from the left side of the bike ... friction lock pulls over the sprocket on right side.

Hydrobikes Models Prior to 2014

The procedure is straight forward and the instruction sheet link is below.

Friction Lock Instructions

We Also Recommend

\ \ Drive Train Base Unit\ \ $ 82900$ 829.00](/content/collections/drive-train/products/drive-train-base-unit/index.html)

\ \ Drive Train Chain\ \ $ 6600$ 66.00](/content/collections/drive-train/products/drive-train-chain/index.html)

\ \ Lever Arm and Bracket Assembly\ \ $ 16900$ 169.00](/content/collections/drive-train/products/lever-arm-and-bracket-assembly/index.html)

\ \ Lever Arm Assembly\ \ $ 8900$ 89.00](/content/collections/drive-train/products/lever-arm-assembly/index.html)

\ \ Lever Arm Bracket Kit\ \ $ 8900$ 89.00](/content/collections/drive-train/products/lever-arm-bracket-kit/index.html)

Close Cart

hydrobikes.com

hydrobikes.com is blocked